Page 53 - Hilti (HK) – Product Catalogue

Standard stud anchor HSA

BASE MATERIALS Approvals
● Concrete (uncracked) ETA 11/0374 for HSA stud anchor (ETAG 001-02,
ETA
Option 7)
Approvals and test reports may apply to selected products only. Please refer
APPLICATIONS
to the documents for details.
● Wide range of fastening applications in concrete
Watch Video
● Fastening facade brackets
● Fastening columns and beams
● Fastening brackets and channels
ADVANTAGES
● ETA-approved torquing using SIW 14-A or 22-A impact wrench
and S-TB
● Fast and easy anchor setting with HS-SC and S-TB
● Excellent edge and spacing distances
● 3 embedment depths offering maximum flexibility
● Suitable for presetting and through-fastening in uncracked
concrete
These are abbreviated instructions which may vary according to the application.

Recommended load (kN), non-cracked concrete at 25N/mm², safety factor(γ)=3
Technical data Model Size M6 M8 M10 M12 M16 M20
Material composition (Galvanized) Steel, zinc-plated (min. HSA Tensile Load, Nrec 2.5 4.2 5.9 8.8 12.0 16.8
5 μm); (standard
(Hot-dip galvanized) Steel, hot-dip embedment) Shear Load, Vrec 2.1 3.5 6.3 9.8 17.0 28.6
galvanized (min. 5 μm); HSA-R/R2 Tensile Load, Nrec 2.5 4.2 5.9 8.8 12.0 16.8
(Stainless steel) Steel, A4(SS316), (standard
A2(SS304) embedment) Shear Load, Vrec 2.4 4.1 7.5 9.7 18.8 30.6
Head configuration Externally threaded Remarks:
Type of fastening Pre-fastening, Through-fastening 1) All the data applies to no edge distance, spacing and other influences
2) For detail design method and cracked concrete information, please refer to Fastening
Approvals / test reports ETA, Fire Technology Manual

Hilti online: www.hilti.com.hk
289