Page 63 - Hilti (HK) – Product Catalogue
P. 63

Drop-in (flush) anchor HKD
















        BASE MATERIALS                                       Approvals
        ●  Concrete (uncracked)                                              ETA 02/0032 for HKD drop-in anchor (ETAG 001-04,
                                                             ETA
                                                                             Option 7)
                                                                             ETA 06/0047 for HKD drop-in anchor multiple
        APPLICATIONS                                         ETA, Fire resistance
                                                                             applications (ETAG 001-06, Option -)
        ●  For medium-duty loads with anchor bolts and threaded rods,   Approvals and test reports may apply to selected products only. Please refer
           e.g. suspension systems for pipes, air ducts, sprinkler systems,   to the documents for details.
           etc.
        ●  For redundant applications in cracked concrete or single-point
           applications in uncracked concrete
        ADVANTAGES
        ●  Features a lip for flush setting, regardless of hole depth
        ●  Shallow drilling depth (25mm), available in M6, M8, M10 and
           M12 sizes
        ●  Visual check for correct setting when used with Hilti manual
           setting tool

        Technical data
        Material composition       (Galvanized) Steel, zinc-plated (min.
                                   5 μm);
                                   (Sherardized) Steel, zinc-plated
                                   (min.
                                   45 μm);
                                   (Stainless steel) Steel, A4 (SS316)  These are abbreviated instructions which may vary according to the application.
        Head configuration         Inner thread
        Type of fastening          Pre-fastening
        Approvals / test reports   ETA, Fire, FM (Factory Mutual)
        Suitable for cracked concrete  Yes
        with redundant fastenings

        Recommended load (kN), non-cracked concrete at 25N/mm², safety factor(γ)=3
                         M6x25/  M8x30/  M10x40/  M12x50/  M16x65/
         Model    Size                               M20x80
                         1/4”x25  5/16”x30  3/8”x40  1/2”x50  5/8”x65
               Tensile Load, Nrec  2.1  2.8  4.3  5.9  8.8  12.0
         HKD
               Shear Load, Vrec  1.7  2.9  3.7  6.1  11.3  16.3
         HKD-  Tensile Load, Nrec  2.1  2.8  4.3  5.9  8.8  12.0
          SR/
        HKD-ER  Shear Load, Vrec  2.1  2.8  3.5  6.2  10.7  17.0
        Remarks:
        1) All the data applies to no edge distance, spacing and other influences
        2) For detail design method, please refer to Fastening Technology Manual























                                                                                            Hilti online: www.hilti.com.hk
        299
   58   59   60   61   62   63   64   65   66   67   68