Page 70 - Hilti (HK) – Product Catalogue

ANCHORING SYSTEMS 8

Sleeve anchor HLC

BASE MATERIALS
● Concrete (uncracked)
● Masonry (solid)

APPLICATIONS
● Suitable for a large range of temporary fastening applications,
fastening small items etc.

ADVANTAGES
● Variety of lengths and sizes allows for a multitude of applications
● Pre-assembled anchor for fast, easy installation
These are abbreviated instructions which may vary according to the application.
● Suitable for different base materials due to expansion principle
● Ideal for through-fastening applications
● Practical information printed on the sleeve indicates the right
drill bit
● Bulged middle section of sleeve with triangular diamond shaped
openings prevent the anchor from rotating in its hole or dropping
out of an overhead hole
Recommended load (kN), non-cracked concrete at 25N/mm², safety factor(γ)=3
Technical data Model Size M5 M6 M8 M10 M12 M16
Environmental conditions Indoor, dry conditions
Tensile Load,
Material composition Steel, zinc-plated (min. 5 μm) HLC, HLC-H, 0.7 1.2 1.5 2.4 3.3 4.4
Material, corrosion Steel, zinc-plated HLC-EC / EO, Nrec
HLC-L,
Type of fastening Pre-fastening, Through-fastening HLC-SK, Shear Load,
Approvals / test reports Fire HLC-T 1.1 2.3 2.9 4.8 6.7 6.7
Vrec
Remarks: 8
1) All the data applies to no edge distance, spacing and other influences
2) For detail design method, please refer to Fastening Technology Manual

Customer Hotline: Hong Kong 8228 8118, Macau 00800 8228 8118 Email: hksales@hilti.com
306