Page 45 - Hilti (HK) – Product Catalogue
P. 45

Safety anchor HSC-A (Externally threaded)
















        BASE MATERIALS                                       Approvals
        ●  Concrete (cracked)                                BZS/shock      BZS D 06-601 for HSC self-cutting undercut anchor
        ●  Concrete (uncracked)                              ETA            ETA 02/0027 for HSC self-cutting undercut anchor
                                                                            (ETAG 001-03, Option 1)
                                                             Approvals and test reports may apply to selected products only. Please refer
        APPLICATIONS                                         to the documents for details.
        ●  Safety-relevant, medium-duty fastenings in cracked or
           uncracked concrete, especially where shallow embedment and/
           or small edge distance or close spacing is required
        ●  Examples: stair hand rails, sprinkler pipes, air ducts, seating,
           facade substructures, car park barriers, etc.
        ADVANTAGES
        ●  Shallow embedment depth for thin concrete slabs or where
           permissible drilling depth is limited
        ●  Combines high working loads with small edge distances and
           close spacing thanks to very low expansion forces
        ●  Self-undercutting facilitates fast and reliable installation - no
           separate undercutting tool or handling needed
                                                            These are abbreviated instructions which may vary according to the application.
        Technical data
        Material composition       (Galvanized) Bolt: steel, 8.8 grade,
                                   zinc-plated (min. 5 μm);
                                   (Stainless steel) Steel, A4(SS316)
        Head configuration         Externally threaded
        Type of fastening          Pre-fastening
        Additional product information  Meets approval requirements when
                                   installed using the specified stop
                                   drill bit, setting tool and rotary
                                   hammer
        Installation direction     All

        Technical data
        Recommended load (kN), non-cracked concrete at 25N/mm², safety factor(γ)=3
            Model       Size     M8x40  M8x50  M10x40  M12x60
                     Tensile Load, Nrec  4.3  5.9  4.3  7.8
           HSC-A
                     Shear Load, Vrec  4.9  4.9  7.7  11.2
                     Tensile Load, Nrec  4.3  5.9  4.3  7.8
           HSC-AR
                     Shear Load, Vrec  4.3  4.3  6.8  9.8
        Recommended load (kN), cracked concrete at 25N/mm², safety factor(γ)=3
            Model       Size     M8x40  M8x50  M10x40  M12x60
                     Tensile Load, Nrec  3.0  4.2  3.0  5.6
           HSC-A
                     Shear Load, Vrec  4.9  4.9  6.1  11.2
                     Tensile Load, Nrec  3.0  4.2  3.0  5.6
           HSC-AR
                     Shear Load, Vrec  4.3  4.3  6.1  9.8
        Remarks:
        1) All the data applies to no edge distance, spacing and other influences
        2) For detail design method and cracked concrete information, please refer to Fastening
          Technology Manual











                                                                                            Hilti online: www.hilti.com.hk
        281
   40   41   42   43   44   45   46   47   48   49   50