Page 47 - Hilti (HK) – Product Catalogue
P. 47

Safety anchor HSC-I (Internally threaded)
















        BASE MATERIALS                                       Approvals
        ●  Concrete (cracked)                                BZS/shock      BZS D 06-601 for HSC self-cutting undercut anchor
        ●  Concrete (uncracked)                              ETA            ETA 02/0027 for HSC self-cutting undercut anchor
                                                                            (ETAG 001-03, Option 1)
                                                             Approvals and test reports may apply to selected products only. Please refer
        APPLICATIONS                                         to the documents for details.
        ●  Safety-relevant, medium-duty fastenings in cracked or uncracked
           concrete, especially where shallow embedment and/or small
           edge distance or close spacing is required
        ●  Examples: stair hand rails, sprinkler pipes, air ducts, seating,
           facade substructures, car park barriers, etc.
        ADVANTAGES
        ●  Shallow embedment depth for thin concrete slabs or where
           permissible drilling depth is limited
        ●  Combines high working loads with small edge distances and
           close spacing thanks to very low expansion forces
        ●  Self-undercutting facilitates fast and reliable installation - no
           separate undercutting tool or handling needed
                                                            These are abbreviated instructions which may vary according to the application.
        Technical data
        Material composition       (Galvanized) Bolt: steel, 8.8 grade,
                                   zinc-plated (min. 5 μm);
                                   (Stainless steel) Steel, A4(SS316)
        Head configuration         Inner thread
        Type of fastening          Pre-fastening
        Additional product information  Meets approval requirements when
                                   installed using the specified stop
                                   drill bit, setting tool and rotary
                                   hammer
        Installation direction     All

        Technical data
        Recommended load (kN), non-cracked concrete at 25N/mm², safety factor(γ)=3
            Model       Size   M6x40  M8x40  M8x50  M10x40  M12x60
                    Tensile Load, Nrec  4.3  4.3  5.9  7.8  7.8
            HSC-I
                     Shear Load, Vrec  2.7  4.1  5.1  5.1  6.1
                    Tensile Load, Nrec  4.3  4.3  5.9  7.8  7.8
           HSC-IR
                     Shear Load, Vrec  2.3  3.6  4.4  4.4  5.3

        Recommended load (kN), cracked concrete at 25N/mm², safety factor(γ)=3
            Model       Size   M6x40  M8x40  M8x50  M10x40  M12x60
                    Tensile Load, Nrec  3.0  3.0  4.2  5.6  5.6
            HSC-I
                     Shear Load, Vrec  2.7  4.1  5.1  5.1  6.1
                    Tensile Load, Nrec  3.0  3.0  4.2  5.6  5.6
           HSC-IR
                     Shear Load, Vrec  2.3  3.6  4.4  4.4  5.3
        Remarks:
        1) All the data applies to no edge distance, spacing and other influences
        2) For detail design method and cracked concrete information, please refer to Fastening
          Technology Manual











                                                                                            Hilti online: www.hilti.com.hk
        283
   42   43   44   45   46   47   48   49   50   51   52